Pleter 2

Primers Equinox Edition

Specifically designed for professional motion imaging cameras

 

Primers EQX for SONY FS7 / FS5

 

FS7 Primers are designed specifically for its sensor, S-Log3 gamma and S-Gamut3.Cine color space as a shooting basis. Usable also with Sony FS5.

Primers-FS7-web

Generic Sony SL3/SG3C > 709TypeA 3DLUT compared to FS7 Primer 02_NTR 3DLUT

(may require page re-loading)

FS7 Primers EQX package contains:

– 4x 64^3 S-Log3/S-Gamut3.Cine > rec.709 cube files for post production

– 4x 33^3 S-Log3/S-Gamut3.Cine > rec.709 cube files for camera preview

– Primers info document

Achieved:

– Improved color accuracy and harmonized response

– Maximum sensor dynamic range utilization

– Improved highlight handling

– Improved color separation

– More natural image aesthetics

– No more “Sony look”

Sony FS7 Primers are also usable with Sony FS5 with 10 bit recording. Prores on external recorders is highly advised to remove the macroblocking and increase thickness of the material for Primers to correct the signal.

 

Pleter 2

 

 

Primers Standard Edition

 

SONY A7 Primers

 

Omeneo_A7R2_Primers_web2

Package includes:

Set of 33^3 cube files designed specifically for each camera model’s sensor and color science, covering most shooting scenarios.

Achieved:

– Improved color accuracy and harmonized response

– Maximum dynamic range utilization

– More natural image aesthetics

– No more “Sony look”

– Reduced image deterioration with XAVC-S codec, compared to required primary color correction and generic LUTs

– Stabilized color properties for further image manipulation and look creation

 

NOTE: Primers are best used with Prores recordings, but can also be successfully applied to in camera recorded XAVC-S in most scenarios, depending on camera compression efficiency.

For more info about general LUT usage please check the bottom of the page with useful links.

 

Sony A7R2 Primers

(13 Primers, 11 gray scale neutral & 2 bonus toned)

S-Log2 gamma, S-Gamut color base > rec.709

 

 

Sony A7S1 Primers

(12 Primers, gray scale neutral)

S-Log2 gamma, S-Gamut color base  > rec. 709

 

Sony A7S2 Primers

(13 Primers, gray scale neutral, for SLog2 & Cine4 gamma)

Option 1)

CAMERA SETUP: Cine4 gamma, S-Gamut3.Cine color, saturation: 20, black gamma: wide, level +3

Option 2)

CAMERA SETUP : S-Log2 gamma, S-Gamut3.Cine color, saturation: 25

 

SONY A6300 / A6500 Primers

Omeneo_A6300_Primers_web

Package includes:

12 Primers for Cine4 S-Gamut3cine & S-Log2 S-Gamut3cine  > rec.709 (33^3 cube)

Option 1)

CAMERA SETUP: Cine4 gamma, S-Gamut3.Cine color, saturation: 20; black gamma: wide, level +3; Knee:mode manual, point 75%, Slope +5

Option 2)

CAMERA SETUP: S-Log2 gamma, S-Gamut3.Cine color, saturation: 25

 

SONY RX10 Primers

RX10_webPackage includes:

10 Primers for Cine2 & S-Log2 gamma  > rec.709  (in 2 levels of precision, 64^3 for post and 33^3 for monitoring)

Option 1)

CAMERA SETUP: Gamma: Cine2,  color:still, saturation: -4; black gamma: wide, level: +7

Option 2)

CAMERA SETUP:

Gamma:S-Log2, color: stills, saturation: -3

 

 

 

EXAMPLES:

(may require page reloading)

 

Sony RX10M2 Standard profile vs. camera mod + Primers

 

 

 

 

Sony A7R2 – S-Log2 S-Gamut video frame grabs, standard contrast & saturation vs. Primers signal optimization